Wolf Classic - Hanover White

Hanover White is a refreshing style that will complement any design aesthetic. This transitional choice is simultaneously understated and loaded with character.

Specifications
Door/Drawer Specs
Construction
10x10 Kitchen
Shipping/Returns
Useful Links
Lead Time

Hanover White

White paint
Standard with CARB II compliant all plywood box

1/2" sides, backs, tops, and bottoms

3/4" sold wood corner blocks on base cabinets
3/4" HDF doors with a recessed MDF center panel
3/4" Solid HDF drawer fronts
Partial-overlay design
Solid wood dovetail drawer construction
Undermount, full-extension, soft-close drawers
Hidden, six-way adjustable hinges with soft-close mechanism
Hidden plywood hanging rails top and bottom

Wolf Classic Expression Series Specs

BUY WITH CONFIDENCE

You can be confident when choosing Wolf Classic cabinets. In addition to the specifications below and the certifications from the Kitchen Cabinet Manufacturers Association (KCMA) and the Environmental Stewardship Program (ESP) for both the Expression and Insight Series, Wolf Classic boasts a 5-year warranty.

1. Face Frames	Made from 3/4" thick solid wood. Front Stiles are pocket drilled and assembled with 1 1/4" screws for rugged durability. Top panels are 1/2" solid maple plywood.
2. Side Panels	1/2" plywood with matching exterior laminate, glued and stapled in a 1/2" dado in the cabinet's front frame
3. Back Panels	Made from vinyl covered (inside only) 1/2 ̋ plywood, glued and nailed in a 1/2" dado and stapled to the cabinet top and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
4. Shelves	Wall Cabinets - Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides. Base Cabinets - Half-depth adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides.
5. Corner Blocks (Bases)	3/4" Solid wood corner blocks installed on corners of base cabinets
6. Drawers And Drawer Glides	Drawers - Sides are constructed of 5/8" clear finished solid wood with dovetail construction. Drawer bottoms are 1/4" plywood in a dado into drawer sides. Drawer Glides - USA made Grass drawer glides - Soft close and full extension undermount glides with a 75 lb rating.
7. Hinges	USA made Grass hinges - Six-way adjustable hinges with integrated soft-closing mechanism. Cabinets with Bi-fold doors are not soft closing. All single door cabinets are standard with the hinges on the left hand side of the cabinet. For right side hinge placement: Wall cabinets can be flipped Base cabinets would require job site adjustment to right side and touchup of left side.
Interiors	White to match exterior

Wolf Classic cabinets comply with The Kitchen Cabinet Manufacturers Association (KCMA) Certification Program and are 100% CARB-compliant, meeting the rigorous requirements of ESP 05-12 for Air Quality, Resource Management of Product and Process, Environmental Stewardship, and Community Relations. Wolf Classic cabinets are also an approved participant in the KCMA Environmental Stewardship Program.

Basic 10x10 Kitchen - What is a 10x10 Kitchen?

Currently Wolf Classic Cabinets are only available for ordering in NC, SC, GA, FL and TN (New areas may be added without notice, so if you are in a different state, inquire at orders@thewcsupply.com). The cost for shipping is a flat $250. However orders over $2,500 will ship FREE.

Most Wolf Classic orders will be shipped via Wolf Home Products truck or a last mile delivery service, no matter how small or how large the order. That includes delivery to the job site. Customer or representative of customer is required to assist in the delivery. Deliveries will not be made to specific rooms of a home. However, the driver may unload to an area outside of the home, such as a garage, carport or ground level porch of the home that will allow one person handcart access if close truck access is available

Returns - Wolf Classic products are returnable within 60 days of receipt.

All returns requested within 30 days of receipt will be subject to a 20% restocking charge.
Material over 30 days old will be charged a 35% restocking charge.
Material over 60 days old is not returnable.

Depending on the manufacturer, most cabinets typically arrive within 2-4 weeks but please allow 5-6+ weeks for extenuating circumstances that are out of our control like back orders, delivery delays, damages, defects, etc. (For "Special Order" cabinets - Add 6 weeks to the timeframes listed above.)

Unfortunately, those do occur occasionally, though not often. We will take care of replacements (as long as receiving instructions are properly followed), but we need time to send them.

Since these things are inevitable and out of our control, we can't be responsible for any delays, additional costs, labor or other inconveniences on your project that might be experienced as a result, so please plan accordingly.