Fully Assembled, Semi Custom Kitchen and Bath Cabinetry at RTA Prices... Why Shop Anywhere Else?

WBC2736 - Amesbury Brown - 36" High Wall Blind Corner Cabinet

$287.00 $154.98

  • Width 27", height 36", depth 12"
  • Wall Blind Corner Cabinet with single door
  • Adjustable half depth shelf
PLEASE READ ALL OF THE BELOW BEFORE ORDERING:
  • Actual cabinet width is 27" but it must be 'pulled' at least 1 1/2" from the wall when installed.
    • This means there will be an empty space between the cabinet and the adjacent wall when installed.
  • Minimum pull is 28.5" (See 2nd picture)
  • Maximum pull is 31" (See 2nd picture)
  • Door opening is 12".
  • We also recommend installed a 3" filler (minimum) before installing the first cabinet on the adjacent wall. See second picture for illustration.
  • To match adjacent 3" reveal on filler, pull cabinet to 30"
    • Filler sold separately - See WF336.
  • If ordering assembled, specify which side is 'blind'.
    • Example: Both pictures are right side blind.

JSI Cabinetry Premier Series Construction Specs

1.  Face Frames

3/4 ̋ x 11/2 ̋ Solid Maple   

2.  End Panel

 1/2 ̋-thick Plywood - Finished to match on exterior

3.  Top and Bottom (Walls)

 1/2 ̋-thick Plywood  

4.  Bottom (Bases)

3/8 ̋-thick Plywood  

5.  Shelves

 Adjustable 5/8 ̋-thick Plywood, Edgebanded on front  

6.  Back

 1/2 ̋-thick Solid Plywood  

7.  Hang Rails (Walls)

 5/8 ̋-thick Solid Wood  

8.  Toe Kick

 1/2 ̋-thick Plywood, Unfinished, Recessed  

9.  Drawer Box

3/4 ̋-thick Solid Wood sides and 3/8 ̋-thick bottom  

 10.  Glides

Full-extension, soft close, undermount drawer glides  

 11.  Hinges

6-way-Adjustable, Concealed Hinge - Soft Closing

  • Interiors

Finished in Natural Maple  

  • Assembly Charges

$12 per wall cabinet; $18 per base and $25 per tall cabinet.  Accessories such as pullouts and roll our trays are extra.

 

Freight - Most orders will be shipped via LTL curbside freight, no matter how small or how large the order.  That includes delivery to the jobsite and liftgate.  

The cost for freight delivery is based on the delivery address and is as follows:

  • A flat $350 for any state bordering the Mississippi river or east of the Mississippi river.
  • A flat $700 for ND, SD, NE, KS, OK, TX, NM, CO, WY, MT, UT, AZ
  • A flat $950 for CA, OR, WA, ID, NV

FedEx - On small orders of unassembled cabinets, trim, fillers, etc.  You will be able to select FedEx at checkout.  The total will be calculaed at checkout based on the items in your cart.  Typically this runs $35-$40 a cabinet. 

Returns - Assembled cabinets CANNOT be returned or refunded.  Unassembled (Ready to Assembled/RTA) cabinets, trim, etc can be returned as long as they are in good condition and in their original packaging.  Returns on these items will be subject to return shipping charges and a 25% restocking fee.  

The cabinets typically arrive in about 2-3 weeks but please allow 4-5+ weeks for extenuating circumstances like out of stock items, delivery delays, damages, etc.  Unfortunately, all of those do occur occasionally, though not often.  We will take care of replacements (as long as receiving instructions are properly followed), but we need time to send them.  Ultimately, we cannot be responsible for any delays on your project that might be experienced as a result of said delays or damages, so please plan accordingly and allow plenty of time when ordering your cabinets.