We have 3 series of cabinets from two different manufacturers, but regardless of the series, you can be assured that the cabinets you buy from Wholesale Cabinet Supply are built with an all plywood construction.

  

See below for specifics on each series:

JSI Cabinetry Premier Series 

JSI Cabinetry Premier Series Construction Specs

1.  Face Frames

3/4 ̋ x 11/2 ̋ Solid Maple   

2.  End Panel

 1/2 ̋-thick Plywood - Finished to match on exterior

3.  Top and Bottom (Walls)

 1/2 ̋-thick Plywood  

4.  Bottom (Bases)

3/8 ̋-thick Plywood  

5.  Shelves

 Adjustable 5/8 ̋-thick Plywood, Edgebanded on front  

6.  Back

 1/2 ̋-thick Solid Plywood - Unfinished

7.  Hang Rails (Walls)

 5/8 ̋-thick Solid Wood  

8.  Toe Kick

 1/2 ̋-thick Plywood, Unfinished, Recessed  

9.  Drawer Box

3/4 ̋-thick Solid Wood sides and 3/8 ̋-thick bottom  

 10.  Glides

Full-extension, soft close, undermount drawer glides  

 11.  Hinges

6-way-Adjustable, Concealed Hinge  

  • Interiors

Finished in Natural Maple  

  • Assembly Charges

$14 per wall cabinet; $20 per base and $30 per tall cabinet.  Accessories such as pullouts and roll our trays are extra.

 

JSI Cabinetry Designer Series 

JSI Cabinetry Designer Series Construction Specs




1.  Face Frames

    Material:

    Solid North American Maple

    Dimensions:

    3/4 ̋ x 11/2 ̋ (Sturbridge, Dover, Essex, Trenton, Kingston, Yarmouth)

    3/4 ̋ x 19/16 ̋ Mortise & Tenon Construction (Georgetown and Wheaton)

    2.  End Panel 

      1/2 ̋-thick Plywood

       - Finished to match on exterior

      3.  Top and Bottom (Walls)

        1/2 ̋-thick Plywood

        4.  Bottom (Bases)

          3/8 ̋-thick Plywood

          5.  Shelves

            Adjustable 3/4 ̋-thick Plywood, Edgebanded on front

            6.  Back

              1/2 ̋-thick Solid Plywood - Unfinished

              (Georgetown and Wheaton have 1/8 ̋-thick Plywood framed to 1/2 ̋) - Unfinished

              7.  Hang Rails (Walls)

                5/8 ̋-thick Solid Wood

                8.  Toe Kick

                  1/2 ̋-thick Plywood, Unfinished, Recessed
                  (Georgetown and Wheaton have matching toe kick)

                  9.  Drawer Box

                    Pre-assembled, Dovetail with 3/4 ̋-thick Solid Wood sides and 3/8 ̋-thick bottom

                    If ordered unassembled:  Trenton and Yarmouth have unassembled Dovetail drawer box

                    10.  Glides

                      Full-extension, soft close, undermount drawer glides

                      11.  Hinges

                        6-way-Adjustable, Concealed, with Soft Close Integrated Hinge

                        • Interiors

                        Finished in Natural Maple


                        (Georgetown, Sturbridge and Kingston have finish matching the doors)

                        • Soft Close Doors

                        All Designer line kitchen cabinets come standard with soft close doors

                        • Assembly Charges

                        $14 per wall cabinet; $20 per base and $30 per tall cabinet.  Accessories such as pullouts and roll our trays are extra.

                         

                        Designer Series Construction Photos

                        Top View of Base Cabinet:

                         

                        Inside View of Wall Cabinet (Adjustable Shelves Not Installed): 

                        Top/Bottom View of Wall Cabinet: 

                        Wolf Classic Expression Series

                        Wolf Classic Expression Series Specs

                        BUY WITH CONFIDENCE

                        You can be confident when choosing Wolf Classic cabinets. In addition to the specifications below and the certifications from the Kitchen Cabinet Manufacturers Association (KCMA) and the Environmental Stewardship Program (ESP) for both the Expression and Insight Series, Wolf Classic boasts a 5-year warranty.

                         

                        1.  Face Frames

                          Made from 3/4" thick solid wood.  Front Stiles are pocket drilled and assembled with 1 1/4" screws for rugged durability.  Top panels are 1/2" solid maple plywood.  

                          2.  Side Panels 

                            1/2" plywood with matching exterior laminate, glued and stapled in a 1/2" dado in the cabinet's front frame

                            3.  Back Panels 

                              Made from vinyl covered (inside only) 1/2 ̋  plywood, glued and nailed in a 1/2" dado and stapled to the cabinet top and bottom.  Plywood hanging rails are installed at both the top and bottom of the cabinet.  Unfinished.

                              4.  Shelves

                                Wall Cabinets - Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges.  The shelves are held in place with self-locking 1/4" diameter clips on the sides.

                                Base Cabinets - Half-depth adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges.  The shelves are held in place with self-locking 1/4" diameter clips on the sides.

                                5.  Corner Blocks (Bases)

                                  3/4" Solid wood corner blocks installed on corners of base cabinets 

                                  6.  Drawers And Drawer Glides

                                  Drawers - Sides are constructed of 5/8" clear finished solid wood with dovetail construction.  Drawer bottoms are 1/4" plywood in a  dado into drawer sides.  

                                  Drawer Glides - USA made Grass drawer glides - Soft close and full extension undermount glides with a 75 lb rating.  

                                  7.  Hinges 

                                    USA made Grass hinges - Six-way adjustable hinges with integrated soft-closing mechanism. Cabinets with Bi-fold doors are not soft closing.   

                                    All single door cabinets are standard with the hinges on the left hand side of the cabinet.  For right side hinge placement:

                                    • Wall cabinets can be flipped
                                    • Base cabinets would require job site adjustment to right side and touchup of left side.  
                                    • Interiors

                                    White to match exterior

                                    Wolf Classic cabinets comply with The Kitchen Cabinet Manufacturers Association (KCMA) Certification Program and are 100% CARB-compliant, meeting the rigorous requirements of ESP 05-12 for Air Quality, Resource Management of Product and Process, Environmental Stewardship, and Community Relations. Wolf Classic cabinets are also an approved participant in the KCMA Environmental Stewardship Program.

                                    JSI Cabinetry Virtual Showroom 
                                    Browse JSI Cabinetry's virtual showroom below!