JSI Cabinetry Designer Series

KD-BSKIN

BSKIN - Dover White - Base Skin

  • Width 23 3/8", height 34 1/2"
  • 1/4" thick
  • Base Skin
  • Cabinet sides come prefinished so this isn't a necessary item to order but they can be used to 'flush out' the side of an exposed cabinet with it's face frame. ’â_

Freight - Most orders will be shipped via LTL curbside freight, no matter how small or how large the order.  If there are limitations to freight delivery, please notify us in advance.  There may be additional charges if limitations require extra charges to complete delivery to the address supplied.  

The cost for freight delivery is based on the delivery address and is as follows:

  • A flat $350 for any state bordering the Mississippi river or east of the Mississippi river.
  • A flat $700 for ND, SD, NE, KS, OK, TX, NM, CO, WY, MT, UT, AZ
  • A flat $950 for CA, OR, WA, ID, NV

FedEx - On small orders of unassembled cabinets, trim, fillers, etc.  You will be able to select FedEx at checkout.  The total will be calculaed at checkout based on the items in your cart.  Typically this runs $35-$40 a cabinet. 

Returns - Assembled cabinets CANNOT be returned or refunded.  Unassembled (Ready to Assembled/RTA) cabinets, trim, etc can be returned as long as they are in good condition and in their original packaging.  Returns on these items will be subject to return shipping charges and a 25% restocking fee.  

Depending on the manufacturer, most cabinets typically arrive within 2-4 weeks but please allow 5-6+ weeks for extenuating circumstances that are out of our control like back orders, delivery delays, damages, defects, etc.  (For "Special Order" cabinets - Add 6 weeks to the timeframes listed above.)

Unfortunately, those do occur occasionally, though not often. We will take care of replacements (as long as receiving instructions are properly followed), but we need time to send them.

Since these things are inevitable and out of our control, we can't be responsible for any delays, additional costs, labor or other inconveniences on your project that might be experienced as a result, so please plan accordingly.


JSI Cabinetry Designer Series Construction Specs

1.  Face Frames

    3/4" thick x 1 1/2" wide solid North American maple 

    2.  End Panel 

      1/2 ̋-thick Plywood (Finished to match on exterior)

      3.  Top and Bottom (Walls)

        1/2 ̋-thick Plywood

        4.  Bottom (Bases)

          3/8 ̋-thick Plywood

          5.  Shelves

            Adjustable 3/4 ̋-thick Plywood, Edgebanded on front

            6.  Backs

            1/2 ̋-thick Solid Plywood
            7.  Hang Rails (Walls)

              5/8 ̋-thick Solid Wood

              8.  Toe Kick

                1/2 ̋-thick Plywood, Unfinished, Recessed

                9.  Drawer Box

                  Dovetail with 3/4 ̋-thick solid wood sides and 3/8 ̋-thick bottom

                  10.  Glides

                    Full-extension, soft close, undermount drawer glides

                    11.  Hinges

                      6-way-Adjustable, Concealed, with Soft Close Integrated Hinge

                      Interiors

                        Finished in Natural Maple

                        Soft Close Doors

                          Standard with soft close hinges