Currently only available for delivery to NC, SC, GA, and FL

Free Shipping On All Wolf Classic Orders Over $2,500!!!

WOLF Classic Cabinets are proudly made in the USA and factory-assembled without cams, brackets or clips! They are handcrafted, combining generations of woodworking expertise with today’s latest manufacturing technologies. Solid hardwood components and a state-of-the-art finishing systems produce a consistently beautiful and long-lasting appearance.

Wolf Classic's Expression Series offers great style and practical storage to make your kitchen look as good as it performs. Affordable, high-quality cabinets with a five-year warranty and features (see below) typically found in much more expensive cabinetry enable you to make the kitchen of your dreams a reality. If you're looking for a set of high-quality kitchen cabinets that offer excellent value for your money, look no further than Wolf Classic. Wolf Classic cabinets are great for the bathroom, too — explore your options below!

General Info

The following features are STANDARD on all of the Wolf Classic - Expression Series Cabinets:

Standard with CARB II compliant all plywood box
Dovetail drawer boxes
Full Extension, soft closing drawer glides
3/4" solid maple face frames
3/4" solid wood corner blocks on base cabinets
Solid wood dovetail drawer construction
Undermount, full-extension, soft-close drawers
Hidden, six-way adjustable hinges with soft-close mechanism
- Cabinets with bi-fold doors are not soft close

Construction

Wolf Classic Expression Series Specs

BUY WITH CONFIDENCE

You can be confident when choosing Wolf Classic cabinets. In addition to the specifications below and the certifications from the Kitchen Cabinet Manufacturers Association (KCMA) and the Environmental Stewardship Program (ESP) for both the Expression and Insight Series, Wolf Classic boasts a 5-year warranty.

1. Face Frames	Made from 3/4" thick solid wood. Front Stiles are pocket drilled and assembled with 1 1/4" screws for rugged durability. Top panels are 1/2" solid maple plywood.
2. Side Panels	1/2" plywood with matching exterior laminate, glued and stapled in a 1/2" dado in the cabinet's front frame
3. Back Panels	Made from vinyl covered (inside only) 1/2 ̋ plywood, glued and nailed in a 1/2" dado and stapled to the cabinet top and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
4. Shelves	Wall Cabinets - Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides. Base Cabinets - Half-depth adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides.
5. Corner Blocks (Bases)	3/4" Solid wood corner blocks installed on corners of base cabinets
6. Drawers And Drawer Glides	Drawers - Sides are constructed of 5/8" clear finished solid wood with dovetail construction. Drawer bottoms are 1/4" plywood in a dado into drawer sides. Drawer Glides - USA made Grass drawer glides - Soft close and full extension undermount glides with a 75 lb rating.
7. Hinges	USA made Grass hinges - Six-way adjustable hinges with integrated soft-closing mechanism. Cabinets with Bi-fold doors are not soft closing. All single door cabinets are standard with the hinges on the left hand side of the cabinet. For right side hinge placement: Wall cabinets can be flipped Base cabinets would require job site adjustment to right side and touchup of left side.
Interiors	White to match exterior

Wolf Classic cabinets comply with The Kitchen Cabinet Manufacturers Association (KCMA) Certification Program and are 100% CARB-compliant, meeting the rigorous requirements of ESP 05-12 for Air Quality, Resource Management of Product and Process, Environmental Stewardship, and Community Relations. Wolf Classic cabinets are also an approved participant in the KCMA Environmental Stewardship Program.

Finish Process

Wolf Classic Finishing Process

All surfaces are machine-sanded.
Dust particles are removed before entering each spray machine.
Product enters an automated finish system where solvent- based pigment stain is applied.
Product is sealed and put through a pre-cure drying process.
Complete cure is done with slow bake process.
All edges of parts are hand-sanded before being put in a brush-sanding machine.
Final topcoat is applied and put through a pre-cure process followed by slow bake for final, thorough curing.
Clear finishes use a catalyzed varnish, and paint finishes use a post-catalyzed lacquer.
Products are inspected for defects, cleanliness and smoothness.
The front side of the products gets a stain coat, a sealer coat and final top coat.The backs of drawer fronts and doors get a stain coat and a sealer coat.

Request Free Kitchen Design and Quote

About Our Kitchen Design Request

Our professional kitchen design is completely free! If you need it, we are here to help you design the kitchen of your dreams. When you request our free kitchen design, here is what you will receive:

3D Rendering - Renderings are to be used as a guide to help you visualize your kitchen - details on the rendering may not be EXACT to the actual product you are receiving.
Top down layout view with detailed room and cabinet dimensions
Front view elevations of each wall
Suggested list of cabinets and trim needed to complete your project

You can use this list to build your cart while still having the flexibility to exchange out cabinets based on your preference. Perhaps you decide to put an 18" trash pullout where the designer put a standard 18" base or perhaps you want to increase all of the wall cabinets by 6". The choice is yours as you load your cart!

To take advantage, please fill out the form below and enter as much information as possible so we can get your design back to you as soon as possible. If we have any additional questions or need clarification, we will contact you before sending the design, so please include your best contact information.

In the last section, upload any drawings or sketches you have that could help in designing the kitchen. Pictures of the space can be helpful, but measurements with a floor plan drawing of the kitchen are the most important files you can upload to receive an accurate design and quote. Your drawing doesn't have to be pretty. but please make it legible.

Here are some tips for measuring:

Measure from floor to ceiling in inches and note it as ceiling height. Draw lines to indicate the walls where cabinets will go. Measure the full length of the wall(s) in inches (") and note it on the outside of the wall. Show island or peninsula bar location and size if applicable.
Draw cross marks in the wall to show where doors and windows begin and end. Note their width" x height" and description between their marks.
Next measure and notate all the open wall spaces for cabinets between door trim, window trim and corners.
Finally, note where you want the sink and all appliances to be placed. In an empty room measure to where appliances connect to the utility in the wall or floor.

Accurate measurements are very important to properly size your cabinets. Please call us at (800)917-7736 if you have any questions about making your measured drawing.

Click To Submit A Kitchen Design & Quote Request

General Info
Construction
Finish Process

The following features are STANDARD on all of the Wolf Classic - Expression Series Cabinets:

Standard with CARB II compliant all plywood box
Dovetail drawer boxes
Full Extension, soft closing drawer glides
3/4" solid maple face frames
3/4" solid wood corner blocks on base cabinets
Solid wood dovetail drawer construction
Undermount, full-extension, soft-close drawers
Hidden, six-way adjustable hinges with soft-close mechanism
- Cabinets with bi-fold doors are not soft close

Proudly Made in USA

BY AMERICAN WORKERS, USING 60% OR MORE AMERICAN CONTENT

KCMA Certified

MEETS THE THE PERFORMANCE AND CONSTRUCTION STANDARDS FOR KITCHEN AND VANITY CABINETS SET BY THE KITCHEN CABINET MANUFACTURERS ASSOCIATION IN ANSI/KCMA A161.1

Environmental Stewardship

MEETS THE STANDARDS OF THE KCMA'S ENVIRONMENTAL STEWARDSHIP PROGRAM'S STRICT REQUIREMENTS IN SUPPORT OF RESPONSIBLE FOREST MANAGEMENT THAT PROMOTES SUSTAINABILITY AND LONG-TERM ECONOMIC AND ENVIRONMENTAL BENEFIT. THIS INCLUDES RECYCLING SAW DUST, USING LOW VOC FINISHES, AND CARB APPROVED PLYWOOD.

Wolf Classic Expression Series Specs

BUY WITH CONFIDENCE

You can be confident when choosing Wolf Classic cabinets. In addition to the specifications below and the certifications from the Kitchen Cabinet Manufacturers Association (KCMA) and the Environmental Stewardship Program (ESP) for both the Expression and Insight Series, Wolf Classic boasts a 5-year warranty.

1. Face Frames	Made from 3/4" thick solid wood. Front Stiles are pocket drilled and assembled with 1 1/4" screws for rugged durability. Top panels are 1/2" solid maple plywood.
2. Side Panels	1/2" plywood with matching exterior laminate, glued and stapled in a 1/2" dado in the cabinet's front frame
3. Back Panels	Made from vinyl covered (inside only) 1/2 ̋ plywood, glued and nailed in a 1/2" dado and stapled to the cabinet top and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
4. Shelves	Wall Cabinets - Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides. Base Cabinets - Half-depth adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges. The shelves are held in place with self-locking 1/4" diameter clips on the sides.
5. Corner Blocks (Bases)	3/4" Solid wood corner blocks installed on corners of base cabinets
6. Drawers And Drawer Glides	Drawers - Sides are constructed of 5/8" clear finished solid wood with dovetail construction. Drawer bottoms are 1/4" plywood in a dado into drawer sides. Drawer Glides - USA made Grass drawer glides - Soft close and full extension undermount glides with a 75 lb rating.
7. Hinges	USA made Grass hinges - Six-way adjustable hinges with integrated soft-closing mechanism. Cabinets with Bi-fold doors are not soft closing. All single door cabinets are standard with the hinges on the left hand side of the cabinet. For right side hinge placement: Wall cabinets can be flipped Base cabinets would require job site adjustment to right side and touchup of left side.
Interiors	White to match exterior

Wolf Classic cabinets comply with The Kitchen Cabinet Manufacturers Association (KCMA) Certification Program and are 100% CARB-compliant, meeting the rigorous requirements of ESP 05-12 for Air Quality, Resource Management of Product and Process, Environmental Stewardship, and Community Relations. Wolf Classic cabinets are also an approved participant in the KCMA Environmental Stewardship Program.

Wolf Classic Finishing Process

All surfaces are machine-sanded.
Dust particles are removed before entering each spray machine.
Product enters an automated finish system where solvent- based pigment stain is applied.
Product is sealed and put through a pre-cure drying process.
Complete cure is done with slow bake process.
All edges of parts are hand-sanded before being put in a brush-sanding machine.
Final topcoat is applied and put through a pre-cure process followed by slow bake for final, thorough curing.
Clear finishes use a catalyzed varnish, and paint finishes use a post-catalyzed lacquer.
Products are inspected for defects, cleanliness and smoothness.
The front side of the products gets a stain coat, a sealer coat and final top coat.The backs of drawer fronts and doors get a stain coat and a sealer coat.

Dartmouth

A blank slate can be a wonderful thing. With our Dartmouth cabinets, any kitchen can have a clean, contemporary look. Modern Shaker-style doors make the perfect canvas for your hardware and accessory choices. Available in three different stains and two popular paints, Dartmouth cabinets are as adaptable as they are good-looking.

10x10 Kitchen $2,824 Delivered

Request Free Design and Quote

All WOLF Classic Cabinets are proudly made in the USA and factory-assembled without cams, brackets or clips
Standard with CARB II compliant all plywood box
3/4" solid maple face frames
3/4" solid wood corner blocks on base cabinets
3/4" HDF doors with an MDF center panel (Paint)
3/4" solid maple door frames with veneer center panel (Stains)
Full-overlay design
Recessed-panel door style
Slab top drawer front
Solid wood dovetail drawer construction
Undermount, full-extension, soft-close drawers
Hidden, six-way adjustable hinges with soft-close mechanism
Hidden plywood hanging rails top and bottom

10x10 Kitchen $3,147 Delivered

10x10 Kitchen $2,824 Delivered

All WOLF Classic Cabinets are proudly made in the USA and factory-assembled without cams, brackets or clips
Standard with CARB II compliant all plywood box
3/4" solid maple face frames
3/4" solid wood corner blocks on base cabinets
3/4" HDF doors with an MDF center panel (Paint)
3/4" solid maple door frames with veneer center panel (Stains)
Full-overlay design
Recessed-panel door style
Slab top drawer front
Solid wood dovetail drawer construction
Undermount, full-extension, soft-close drawers
Hidden, six-way adjustable hinges with soft-close mechanism
Hidden plywood hanging rails top and bottom

Dartmouth White

Need a quote? Or do you need a design from scratch?

Got Questions? We have Answers!

Wolf Classic Cabinets - Expression Series

Currently only available for delivery to NC, SC, GA, and FL

General Info

Construction

Finish Process

Wolf Classic Finishing Process

Request Free Kitchen Design and Quote

About Our Kitchen Design Request

Click To Submit A Kitchen Design & Quote Request

Proudly Made in USA

KCMA Certified

Environmental Stewardship

Wolf Classic Finishing Process

Dartmouth

Berwyn Opal

WHAT'S YOUR EMAIL?